Functions; Instruction For Touch Panel; Idt (Intensity Duty-Cycle Timer) Setting - B9Creations Cure XL Instructions For Use Manual

5. Functions

5.1 Instruction for touch panel

1
1 Adjust the light intensity from Level 1 to Level 16.
1
Adjust the duty cycle (See chapter 5.2) from Level 1 to Level 10
(consistent brightness)
Adjust the working time between 5 seconds - 30 minutes.
1
Display: Indicate numerical value and remaining seconds.
2
+ : Increase the level of intensity, duty cycle and working time. Hold and
3
press the button to fast-forward.
4 - : Decrease the level of intensity, duty cycle and working time. Hold and
press the button to rewind.
: Start and stop curing
5
5.2 IDT
(Intensity Duty-Cycle Timer)
• Intensity Setting
Depending on the strength, thickness, and shape of the material, operator
can set the light intensity from Level 1(lowest) to Level 16(strongest). Intensity
range: 7018 –112295 mW/cm
Suggestion: When curing flat and/or thin material, lower the intensity level
with longer timer to optimize the overall strength of the material.
2 3
settings
2
when LED current at 43.8-700mA.
4 5
8