Page 3
Dear Customer, Thank you for choosing the B9 Model Cure XL. A lot of research & developments have gone into the manufacturing of this product. We sincerely hope that it will give you many years of trouble- free use. Please read and understand all the instructions before using this equipment.
Table of Contents 1. Symbols Used 1.1 In these instructions for use 1.2 On the product / packaging 2. Safety Information 2.1 Installation and connection 2.2 Operation 2.3 Maintenance 3. Product Information 3.1 Indications for use 4. Package And Part Name 4.1 Main unit part name 4.2 Table of contents 5.
1. Symbols Used 1.1 In these instructions for use Warning Indicates a potentially hazardous situation that could result in serious injury or death. Caution Indicates a potentially hazardous situation that may result in minor/moderate injury or damage of property. 1.2 On the product / packaging Serial number Catalogue number Manufacturer...
2. Safety Information 2.1 Installation and connection Warning • Please install the product at least 5 cm away from the wall. In addtion, do not place any objects above the product. Please keep the product away from any heating appliances. Overheating the product may cause fire and/or electrocution.
2.2 Operation Warning • This product should be operated by qualified people only. • If the product is in an unnormal state, such as emitting smoke and/or making irregular noise, please switch off the power switch immediately. Pull out the plug and contact the distributor. •...
2.3 Maintenance Warning • If this product is dropped, broken or damaged, switch off the power switch. Then pull out the plug and contact the distributor. Continuing to operate the product may cause fire and/or electrocution. • Be sure to pull out the plug when maintaining the product. •...
3. Product Information • Save time Fast-curing High-power LED, broadband LED, save fabricating time. • Save money Stable and high power LED with constant current circuit, avoid the cost and hastle of replacing UV fluorescent light tube. • Multiple functions Users can set up the curing details easily to gain process efficiencies by Intensity Duty-Cycle Timer (IDT) settings.
4. Package And Part Name 4.1 Part name Operation Panel Cooling fan Handle Power Switch Door Fuse Power Button Outlet 4.2 Components Description Quantity B9 Model Cure XL Power cord Instructions for use...
5. Functions 5.1 Instruction for touch panel Adjust the light intensity from Level 1 to Level 16. Adjust the duty cycle (See chapter 5.2) from Level 1 to Level 10 (consistent brightness) Adjust the working time between 5 seconds - 30 minutes. Display: Indicate numerical value and remaining seconds.
• Duty Cycle Duty cycle is the ratio between pulse duration and the period (the picture below shows the difference between each cycle). Depending on the shrinking rate of the material, operator can set the duty cycle from level1 (10%) to level 10 (100%). Suggestion: When curing small and/or thin material, lower the duty cycle level to reduce the shrinkage and deformation rate.
Page 13
5.3.1 Pause curing during the operation Press to pause curing. button will start flashing when paused. Note, curing will be paused once the door is opened. The button will start flashing as well. 5.3.2 Increase/decrease curing time when pausing curing Press + to increase or press −...
6. Troubleshooting Trouble Possible Cause Measures Time display does not light Blowout of fuse. Replace with new fuse. up even if the power switch is C o n t a c t o u r c u s t o m e r turned on.
7. Maintenance And Cleaning • Remember to have regular inspections of the equipment and parts. • In case of malfunction, do not attempt to repair the product by yourself. Contact customer service for repair. • Before maintenance, switch off the power swtich and pull out the plug. 7.1 Cleaning inner chamber 1- When the inner chamber gets dirty, clean it with soft cloth with alcohol or cleaner.
8. Product Specification Type of Information Specifications Device name LED Light Curing Machine Model name B9 Model Cure XL Power input AC 100-240 V / 50-60 Hz Power consumption 70 W Fuse Quantity of LEDs Wavelength of LEDs 375~470 nm...
In the case the machine malfunctions under normal use, contact B9Creations for the return process. Repairs must be only carried out by B9Creations. If repairs or disassembly during warranty period are not carried out by B9Creations, warranty will expire immediately.