Related Manuals for InfiRay AT1280H Series
Summary of Contents for InfiRay AT1280H Series
- Page 1 AT1280H Series InfiRay Intelligent Infrared Temperature Screening System Operation Manual V1.0.0 Yantai IRay Technology Co., Ltd.
- Page 2 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Contents 1. SOFTWARE CONNECTION ..............1 2．SETTING ....................5 V1.0.0...
- Page 3 “Intelligent Infrared Temperature Screening System Operation Manual” mainly introduces the method of using the software of the intelligent infrared temperature screening system when the AT1280H series of module is used, including environmental parameter configuration, system configuration, shielding area configuration, temperature measurement mode configuration, imaging display, temperature analysis, and other operations.
- Page 4 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China V1.0.0...
- Page 5 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China 2. A dedicated cable for normal product connection; 3. A monitor or other compatible display equipment V1.0.0...
- Page 6 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China 1. Software Connection Firstly, connect the product with specific cable to the PC. Then, connect the software according to the following steps: 1. Double click on the “IRAYBodyTemperatureScreening” application icon, and camera connection interface will pop out as shown in Figure 1.2.
- Page 7 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Figure 1.2 The system software connection setting interface Calibration: device shutter correction Change color pallete: switch the image palette Focus - and focus +: fine focus Auto focus: auto focus Celsius: switch the temperature unit to Celsius...
- Page 8 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China temperature measurement Select drawing color: Select the color of the brush to mark the temperature measuring area Temperature mode switch: standard and human body Capture: turn on and off face mode Alarm ring switch: turn on and off the alarm ring Alarm pop-up switch: turn on and off the alarm window Alarm snap switch: turn on and off alarm snap...
- Page 9 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China 3. After selecting the IP of the device to be connected, click the “Connect” button and the login page will pop up as shown in Figure 1.4. After entering the correct password (password: admini), click login to image and conduct temperature screening analysis.
- Page 10 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Figure 1.6 System software language selection interface 2．Setting Click the Setting button, and the Setting page will pop up as shown in figure 2.1. Figure 2.1 The system software setting interface V1.0.0...
- Page 11 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Environment parameter configuration: enter the parameters in the right edit box to take effect. To save the parameters currently set after the device is power off, click the environment variable take effect button.
- Page 12 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China deleting and other operations. After determining the selected area, turn off the shielding area switch , the selected shielded area will take effect as shown in Figure 2.3.
- Page 13 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Figure 2.4 System software temperature measurement mode configuration interface At the same time, press Ctrl + Shift + R to enter the page of advanced function password input.
- Page 14 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Figure 2.6 System software blackbody area configuration interface Blackbody correction: select the blackbody drawing box and mark the area where the black body is located on the image with maker rectangle, please try to keep the rectangle in the center of the blackbody area.
- Page 15 Yantai IRay Technology Co., Ltd. 11th Guiyang Street, YEDA Yantai 264006, P. R. China Figure 2.7 The interface of blocking the blackbody Figure 2.8 The interface of blocking the blackbody for long time Note: If the blackbody position on imaging is changed, users have to repeat the above operation and make sure the maker rectangle on blackbody entirely.