Setting Of The Component Input Signal (Matrix); Selection Of Input Signal System (Video Format); On/Off Switching Of The On-Screen Display; (Display) - NEC IPS-4000 User Manual

SYSTEM SETTINGS

Setting of the Component Input Signal (MATRIX)

This function sets the component input signal(INPUT 6).
Select MATRIX of SYSTEM A, then press the
select the desired input signal.

Selection of Input Signal System (VIDEO FORMAT)

This is the setting of the video input signal system.
(This should normally be set to AUTO.)
Select VIDEO FORMAT of SYSTEM A, then press the
and select the desired video signal system.

On/Off Switching of the On-screen Display

This setting switches the on-screen display on and off.
Select DISPLAY of SYSTEM B, then press the
set to ON or OFF.
On/off switching is also permitted by the DISPLAY button of the remote control.
On/Off Switching of the LCD Panel Backlight
This setting switches the backlight of the LCD on and off.
Select LCD LIGHT of SYSTEM B, then press the
set to ON or OFF.
or CURSOR button and
or CURSOR button

(DISPLAY)

or CURSOR button and

(LCD LIGHT)

or CURSOR button and
26
SYSTEM A
SOUND ATT 00
TBC ON OFF
Y/ C DELAY - 2 - 1
0 +1+2
MATRIX Cr/ Cb
R-Y/ B-Y Pr/ Pb
AUTO NTSC
VIDEO FORMAT
4.43NTSC PAL
SECAM
SYSTEM A
SOUND ATT 00
TBC ON OFF
Y/ C DELAY - 2 - 1
0 +1+2
MATRIX Cr/ Cb
R-Y/ B-Y Pr/ Pb
AUTO NTSC
VIDEO FORMAT
4.43NTSC PAL
SECAM
SYSTEM B
DISPLAY ON OFF
LCD LIGHT ON OFF
AUTO POWER ON OFF
IR RMT-CTL ON OFF
- - - +
SYNC H V H V
+ - + +
[ DBL ] H V H V
SYSTEM B
DISPLAY ON OFF
LCD LIGHT ON OFF
AUTO POWER ON OFF
IR RMT-CTL ON OFF
- - - +
SYNC H V H V
+ - + +
[ ]
DBL H V H V