Part Names And Functions; Front Panel - NEC IPS-4000 User Manual

1 2 3 4 5
1 2 3 4 5

PART NAMES AND FUNCTIONS

1 2 3 4 5
1 2 3 4 5
1 2 3 4 5

Front Panel

2
POWER
ON/STAND-BY
1
1. POWER Button
Switches the power on or off.
2. POWER Indicator
The indicator is green when the power is on. When the power is switched off, the indicator is red
and the unit enters the standby mode.
3. INPUT Buttons (1 to 7)
These are the input selection buttons. Buttons 8, 9, and 0 do not function.
4. PICTURE FUNC. Button
This button selects the video adjustments.
Each press advances the selection one step in the sequence of COLOR
COLOR ................... Color saturation adjustment
TINT ........................ Tint adjustment
SHARPNESS .......... Picture sharpness adjustment
NOTE: Some video adjustments cannot be selected depending on input signals.
5. MENU Button
This button selects the following adjustments: V-APERTURE, MOTION, STILL, NR, and SPLIT.
Press the button to switch between adjustments.
V-APERTURE: Selects the vertical edge correction (edge enhancement in the vertical direction)
MOTION .................. Selects the motion detection level, provides optimum picture interpolation
to the image, and prevents drops in resolution as well as noise.
STILL ....................... Performs Y/C separation and picture interpolation suited to still pictures.
NR ........................... Reduces picture noise.
SPLIT ...................... Sets the artificial interlace display to half the screen or the full screen.
This is used to view the effects of the scanning line interpolation.
Setting Indicators
IR DISPLAY COM EXT STILL SPLIT BLUE SYSTEM-A
INPUT 1-7
1 2 3 4 5
6 7 8 9 0
3
4
LCD Panel
PICTURE FUNC. MENU
OUTPUT
FORMAT MONITOR
TINT SHARPNESS.
9
5
NORMAL
ENTER
CTL END
REMOTE