Remote Control Notes; Installing The Remote Control Batteries - NEC IPS-4000 User Manual

1 2 3 4
1 2 3 4

REMOTE CONTROL NOTES

1 2 3 4
1 2 3 4
1 2 3 4

Installing the Remote Control Batteries

When it comes time to replace the batteries, two "AAA" type will be
required.
1. Press and open the cover.
2. Align the batteries according to the (+) and (-)
indications inside the case.
3. Replace the cover.
Remote Control Notes
•
Use the remote control within a distance of about 7 m and at an angle of 30 above, below,
to the left and to the right of the remote control sensor located at the front of the main unit.
•
The remote control system may not function when direct sunlight or strong illumination strikes
the remote control sensor of the main unit, or when there is an obstacle in the path.
•
When remote control buttons are pressed and held, main unit operations may not be possible.
•
Do not subject to strong shock.
•
Do not allow water or other liquid to splash on the remote control. If the remote control gets
wet, wipe it dry immediately.
•
Avoid exposure to heat and steam.
•
Remove the batteries from the remote control when the remote control is not going to be used
for a long period.
16