NEC IPS-4000 User Manual page 12

1 2 3 4 5 6
IR DISPLAY COM EXT STILL SPLIT BLUE SYSTEM-A
INPUT 1-7
1 2 3
6 7 8
•
Setting Indicators
1. IR (Infrared Remote Control) Indicator
Lit green: When IR-RMT-CTL of SYSTEM-B is set to "ON"
Lit red: When IR-RMT-CTL of SYSTEM-B is set to "OFF"
2. DISPLAY Indicator
Lit green: When DISPLAY of SYSTEM-B is "ON" (When
set to ON with the DISPLAY button of the remote control.)
Lit red: When OFF
3. COM (Communications) Indicator
Steadily unlit. For service personnel only.
4. EXT (External Control) Indicator
Lit green: When EXTERNAL CONTROL is "ON"
Unlit: When OFF
5. STILL Indicator
Lit green: When STILL of MENU is "ON"
Unlit: When OFF
6. SPLIT Indicator
Lit green: When SPLIT of MENU is "HALF˙ALL"
Unlit: When OFF
7. BLUE Indicator
Lit green: When B-OUT of PICTURE FUNC. is "ON"
Unlit: When off
8. SYSTEM-A Indicator
Lit green: When any of the adjustment items of SYSTEM-
A differ from the factory preset.
Unlit: When all of the adjustment items of SYSTEM-A are
the same as the factory preset.
LCD Panel
7 8
I N1 : V IDEO NTSC
OUT :DBL 5 25 31 . 5K / 60
4 5
MONITOR: IN1 V IDEO
P I C. FNC COLOR
9 0
+11
•
LCD Panel
First Line
Display of the format of the input signal:
Input connector number, Input signal, Video system
Second Line
Display of the format of the output signal:
Scanning system (Number of horizontal scanning lines,
Horizontal frequency, Number of field frequency)
Third Line
The input connector number that is output to MONITOR
OUT and the video type, either S-VIDEO or VIDEO
Fourth Line
Display of adjustment and setting contents
The display will go off when the setting has been exited
with the ENTER button, or when there has been no input
for about 5 seconds.
Example 1
PIC.FNC COLOR
The saturation of the color of the picture adjustment is set
to +10.
Example 2
SYSTEM A
When the MENU button is pressed while holding down the
CTL button to output a display of the system settings.
11
PART NAMES AND FUNCTIONS
First line
Second line
Third line
Fourth line
+10