NEC IPS-4000 User Manual page 14

Image processor
Table of Contents

Advertisement

Available languages

Available languages

8.
MONITOR OUTPUT Connectors
These connectors output the selected input when input selection is INPUT 1 through 5. When input selection is
INPUT 7, the signal selected by MONITOR selection at the time of INPUT 1 through 5 or OFF can be monitored.
VIDEO (BNC type) ............... Outputs the video signal of the equipment connected to INPUT 1 through 5.
S-VIDEO (Mini DIN) ............. Outputs the S-video signal of the equipment with an S-video connector connected
AUDIO L, R (RCA type) ....... Outputs the audio signal of the equipment connected to INPUT 1 through 5.
9.
INPUT 7 Connectors (RGB Input)
RGB (Mini D-SUB 15 Pin) .... This connector is connected with the RGB output connectors of the external
AUDIO L, R (RCA type) ....... These jacks are connected with the audio output jacks of the external equipment.
10. INPUT 6 Connectors (COMPONENT Input)
Y, Cr, Cb (BNC Type) .......... These connectors are connected to the color-difference output connector of the
AUDIO L, R (RCA type) ....... These jacks are connected with the audio output jacks of the external equipment.
11. INPUT 3, 4, 5 Connectors (VIDEO Input)
VIDEO (BNC type) ............... These connectors are connected with the video output connectors of the external
AUDIO L, R (RCA type) ....... These jacks are connected with the audio output jacks of the external equipment.
12. INPUT 1, 2 Connectors (VIDEO Input)
VIDEO (BNC type) ............... These connectors are connected with the video output connectors of the external
S-VIDEO (Mini DIN) ............. These connectors are connected with the S-video output connectors of the external
AUDIO L, R (RCA type) ....... These jacks are connected with the audio output jacks of the external equipment.
to INPUT 1 to 2.
Outputs the S-video signal in place of the video signal of the equipment connected
to INPUT 1 through 5 when composite connectors other than S-video connector
of INPUT 1 through 5 are used .
equipment. Signals input here are output from the OUTPUT connectors.
Signals input here are output from the OUTPUT jacks.
external equipment.
equipment.
equipment.
equipment.
13
PART NAMES AND FUNCTIONS

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ips-4000q

Table of Contents