AEG SCT91800S0 User Manual page 10

10 www.aeg.com
4.6 Ice-cube production
This appliance is equipped with one or
more trays for the production of ice-
cubes.
1. Fill these trays with water
2. Put the ice trays in the freezer
compartment.
4.7 Cold accumulators
One or more cold accumulators are
supplied in the freezer; these increase
the length of time for which food will
keep in the event of a power failure or
breakdown.
4.8 Movable shelves
The walls of the refrigerator are
equipped with a series of supports so
that the shelves can be positioned as
desired.
For better use of space, the front half-
shelves (A) can be placed under the rear
ones. (B)
4.9 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
Do not use metallic
instruments to remove the
trays from the freezer.
4.10 Positioning the sliding
box
1. Lift the shelf with the sliding box
upwards and out of the holders in the
door.
2. Remove the retaining bracket out of
the guide under the shelf.
3. Reverse the above operation to
insert the sliding box at a different
height.
4.11 Carbon Air Filter
Your appliance is equipped with a
carbon filter CLEANAIR CONTROL in a
drawer in the rear wall of the fridge
compartment.
The filter purifies the air from unwanted
odours in the fridge compartment
meaning that the storage quality will be
further improved.
CAUTION!
A
During the operation, always
keep the air ventilation
drawer closed.
B
4.12 DynamicAir
The refrigerator compartment is
equipped with a device that allows for
rapid cooling of foods and more uniform
temperature in the compartment.