Table of Contents
Advertisement
Security
The facilities outlined in this section enable you to protect your phone from improper and unauthorized use.
You may be required to enter one of the five codes (shown below). When the phone prompts you for one of these codes, key in the appropriate number.
•
PIN code (provided by your Network to protect your SIM card if it is stolen)
•
PIN2 code (provided by your Network for charge information and FDN services protection)
•
PUK code (personal unblocking key in case you forget PIN code)
•
PUK2 code (personal unblocking key in case you forget PIN2 code)
•
Security code
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.
Change PINs
PIN code
Your phone can be set up so it needs your PIN code entered at power up before the phone can be used at all. If the PIN code is not entered, not even
incoming calls can be answered. Entering your PIN code incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN code. In
such a case you will have to contact your service provider for a PUK code to unblock your SIM card.
Some SIM cards are set up so that PIN number entry cannot be turned off.
When SIM PIN Lock is enabled, you can change the PIN code.
Changing your PIN code
With the standby screen displayed, press
Key in the current code and press Softkey 1. You are prompted to enter the new code, then to enter it again for confirmation. A confirmation
screen will be displayed momentarily and the Change PINs screen will be displayed.
Activate PIN active function before changing the PIN code.
PIN2 code
Your phone supports advanced feature that may require a PIN2 code to be entered before they can be accessed or modified. Entering your PIN2 code
incorrectly 3 times (not necessarily in the same session) will invalidate the correct PIN2 code. In this case you will have to contact your service provider
for a PUK2 code.
The PIN2 code is SIM card related and may only be available from your service provider.
1, 7, 1 and 1 to display the PIN change screen.
33
Advertisement
Table of Contents
