Call Settings; Redial Blacklist; Call Diversion - NEC e232 User Manual

Charge info (Advice of charge - AoC)
The AoC facility is SIM card and network dependent.
With the standby screen displayed, press
Total charge
Press 1.
Press Softkey 1 to reset the display to zero.
To reset the display to zero, you may be prompted to enter the PIN2 code.
Maximum charge
Press 2.
Key in the maximum number of units allowed and press Softkey 1.
To set the Maximum charge, you may be prompted to enter the PIN2 code.
Unit price
Press 3.
Use the and
If you choose to enter a number (either integer or decimal), key in the required value, or if you selected text, use the text entry procedures to enter
the currency type, using a maximum of three characters. Then press Softkey 1.
To set the Unit price, you may be prompted to enter the PIN2 code.

Redial blacklist

If dialled call is not successfully connected (e.g. number busy), the Auto redial facility will be offered (see page 12). If you have decided to Auto redial
and the call still fails, the number called will be added to the blacklist.
With the standby screen displayed, press

Call settings

With the standby screen displayed, press

Call diversion

Setting Call diversion
With the Calls screen displayed, press 1. There will be a delay while your phone checks its divert status with your network.
Use the and keys to highlight the type of call you wish to divert.
Use the and keys to highlight one of the conditions.
10
4, 3 and 6 to display the change info screen before performing the following procedures.
keys to select whether you enter a whole number (integer), a decimal number or a text code.
4, 3 and 7 to access the numbers in the blacklist.
1 and 6 to display the Calls screen before performing the following procedures.