Kenmore KH-7E01-SS Use & Care Manual page 19

OPERATING INSTRUCTIONS
INSERTING BATTERIES (not included)
Insert 2 AAA/ Alkaline type batteries into your remote control.
1. Flip the backside of your remote control and pull out the battery cover. Insert the batteries in
accordance with the instructions and polarity of the batteries.
2. Change the batteries in the same way depicted above.
NOTICE:
1. Replace the old batteries with the same type batteries. Otherwise, your heater may not function well.
2. Pull out the batteries in case of long terms of disuse to prevent leakage which may impair your remote
control.
3. Do not allow water or liquid to get into the remote control.
CAUTION:
When the appliance is not operated for a long period of time, cleaning or maintenance is conducted or when
the location of the heater is changed, the heater should be turned to OFF and unplugged from the electrical
connection.
Periodic inspection and removal of dirt and contaminants will ensure that equipment can be operated safely.
19