Kenmore KH-7E01-SS Use & Care Manual page 15

Mounting Bracket Installation
5
 Use 4 pieces of PA5mm x 25mm screws (3) to attach the mounting brackets to the wall, making
sure they go into the plastic anchors, tighten them with the screwdriver.
Note: if the mounting surface is solid like wood, no need for plastic anchors.
WALL
6
Heater Installation
 With the help of a partner, fasten the heater to the L-shaped bracket using the pre-installed wing
nuts on the back of the heater and hand tighten the wing nuts.
PA5mm x 25mm Mounting Screw
Qty: 4 pcs
15