Using On-Screen Menu; Basic Menu Operation; Using The Menus - NEC VT460 User Manual

USING ON-SCREEN MENU

Basic Menu Operation

Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced mo-
tion video image is projected.
1. Press the MENU button on the remote control or projector cabinet to
display the Menu.
2. Press the SELECT GH buttons on the remote control or the projec-
tor cabinet to highlight the menu for the item you want to adjust or
set.
3. Press the SELECT E button or the ENTER button on the remote
control or the projector cabinet to select a submenu or item.
4. Adjust the level or turn the selected item on or off by using SELECT
F or E buttons on the remote control or the projector cabinet.
The on-screen slide bar will show you the amount of increase or
decrease.
5. Changes are stored until you adjust it again.
CANCEL ........ Return to the previous screen.
6. Repeat steps 2-5 to adjust an additional item, or press the MENU
button to close the menu.
E-23