Advertisement
8. Connect a VGA cable to the VGA port on the KDS controller and the other end to your other
monitor.
9. Power on the printer and controller. The KDS devices takes ~1 minute to boot up and will show
the startup screen:
Note each display should have their own unique IP from the DHCP server. A brand new KDS
printer will stay on this screen until the system is properly configured. A properly configured
system will boot to the KDS order display grid.
Form: F-730-028 v1.00
VGA Cable Connection
Picture 2.8
Picture 2.9
KDS Multi Station
Quick Start Guide
Page 8 of 26
111-38-URM-003
R2.30
Advertisement
