Advertisement
1. System Requirements
A Multi Station KDS requires the following equipment:
•
1 U220-i, T88V-i, or L90 LFC-i printer (with VGA) containing KDS software. This guide
assumes an L90-i LFC printer however other KDS printers can also be used.
•
1 Epson KD-IB01 KDS controller expansion module.
•
An Epson KDS supported POS terminal connected to the printer via ethernet through a
Local Area Network (LAN). By default the printer is DHCP-enabled and it is assumed the
network is capable of providing a DHCP IP to the printer.
•
2 Logic Controls KB1700 USB bump bars (Legend Sheet D) connected directly to the
printer and the controller. Touchscreen monitors can be connected instead of the bump bars.
•
2 1080p HD monitors (or touchscreens) connected directly to the printer and the controller.
•
A Windows 8.1/10 PC/laptop for running the Windows KDS Configuration Utility.
•
A network switch/router that all devices can be connected to on a local network.
Multi Station Setup:
Form: F-730-028 v1.00
Switch
Point of Sale
Laptop/PC/Tablet
USB Cable.
VGA Cable
Ethernet Cable
KDS Multi Station
Quick Start Guide
Page 3 of 26
Omnilink
KDS
Controller
111-38-URM-003
R2.30
Advertisement
