Advertisement
Quick Links
Fanless VGA
Note
Fanless VGA
>> 20
Component
Clip sets X 2
Heatpipe X 2
Screws :
Package A
Screw-A X 3
Screw-B X 3
Nut-C X 3
>> 01
Front heat
Rear heat
sink base X1
sink base X1
Thermal grease X 1
Package B
Screw-D X 6
( for rear heat sink base )
( Unit : mm )
Package C
Screw-E X 10
( for main front and rear heat sink )
Washer X 4
Spare parts are included.
*
Main front
heat sink X1
Main rear
heat sink X1
Advertisement
Related Manuals for Thermaltake FANLESS VGA
Summary of Contents for Thermaltake FANLESS VGA
- Page 1 Fanless VGA Fanless VGA >> 20 >> 01 ( Unit : mm ) Note Component Front heat Rear heat Clip sets X 2 sink base X1 sink base X1 Main front heat sink X1 Heatpipe X 2 Thermal grease X 1...
- Page 2 >> 19 Exploded Drawing Check Point 1. After completing the Fanless VGA installation, turn on the computer to check if both of the main heat sink are at similar temperature range (Leave the computer running for a few minutes to confirm the temperature and you can tell the difference by turning the computer off and touch both of the heatsinks with your hand).
- Page 3 FANLESS VGA U s e r ' s M a n u a l Taiwan : Thermaltake Technology Co.,Ltd. Address: 8F, No.27, Lane 155, Sec.3, Pei Shen Road, Saen Keng Hsiang, Taipei Hsiang, Taiwan TEL:(886) 2-2662-6501 FAX:(886) 2-2662-6510 E-mail: thermaltake@thermaltake.com Overseas Branch USA: Thermaltake Technology Inc.
- Page 5 > Note >> Dual heatpipe VGA cooler Thank you for purchasing Fanless VGA. This product is a new GPU thermal solution that applies heatpipe technology and can be applied to video card with mounting holes on the PCB. Be sure to read this user guide in order to use this product properly and safely.
- Page 6 Fanless VGA Fanless VGA >> > > >> 21 Note Contents Component Heat Sink Base Installation Clip Installation Heatpipe Installation NOTICE: Thermaltake is not responsible for any damaged caused by the incorrect installation or usage of this product.
- Page 7 Heat sink base Installation Main rear heat sink plate Important : Make sure the finished >> Fanless VGA is similar to the picture as shown. Main rear heat sink needs to be in position underneath with the main front heat sink.
- Page 8 Fanless VGA Fanless VGA >> 04 >> 17 Installation Installation Step1: Apply Step11: Apply the thermal grease on the the thermal grease on the GPU. rear heat sink base. Make sure the surface of the GPU core are clean before >>...
- Page 9 Fanless VGA Fanless VGA >> 16 >> 05 Installation Installation Step10: Mount the main front heat sink. Important : Most GPU`s on the video card are slightly concave, the >> Mount the main front heat sink onto it using screw-E.
- Page 10 Fanless VGA Fanless VGA >> 06 >> 15 Installation Installation Step2: Step9: Install the heatpipe. Place the front heat sink base. Position the heatpipe into the tunnel on front heat sink Place the front heat sink base on top of the GPU.
- Page 11 Fanless VGA Fanless VGA >> 14 >> 07 Installation Installation Step8: Apply thermal grease on the front heat sink base and main front heat sink. Apply equal amount of thermal grease onto the front >> heat sink base (Thermal grease should be also be applied into the "tunnel"...
- Page 12 Fanless VGA Fanless VGA >> 08 >> 13 Installation Installation Step3: Place clip set on to front heat sink base. >> Place clip set onto the front heat sink base (both clip sets are identical, use either one of them).
- Page 13 Fanless VGA Fanless VGA >> 12 >> 09 Installation Installation Step7: Put the second clip set on. Step4: Fix the clip. Please note the mounting arms are adjustable. Adjust >> Put the second clip set on. Please note the mounting >>...
- Page 14 Fanless VGA Fanless VGA >> 10 >> 11 Installation Installation Step5: Tighten the screws on the clip. Step6: Place the rear heat sink base. Turn over the card , place the rear heat sink base on the Use screwdriver to tighten the screws on the clip in order >>...
Need help?
Do you have a question about the FANLESS VGA and is the answer not in the manual?
Questions and answers