Advertisement
Quick Links
Congratulations on your new PC! Accessing the I/O panel and connecting your
peripherals to the Tower 300 is easy! Follow along this guide to learn how:
STEP 1
Remove all three front glass panels to
access the back side.
STEP 2
STEP 3
Loosen the 2 thumb screws to swing
the top fan bracket latch open.
NEED ADDITONAL HELP? CONTACT US:
Monday through Friday
9:00am - 5:30pm PT
TOWER 300 PERIPHERAL SETUP GUIDE
STEP 2
Turn the case around and remove the
top panel by pulling up.
STEP 4
Feed your cables through the vent on
the right side.
888 - 570 - 5247
ttsupport@thermaltakeusa.com
Advertisement
Related Manuals for Thermaltake TOWER 300
Summary of Contents for Thermaltake TOWER 300
- Page 1 TOWER 300 PERIPHERAL SETUP GUIDE Congratulations on your new PC! Accessing the I/O panel and connecting your peripherals to the Tower 300 is easy! Follow along this guide to learn how: STEP 1 STEP 2 Remove all three front glass panels to Turn the case around and remove the access the back side.
- Page 2 TOWER 300 PERIPHERAL SETUP GUIDE STEP 5 Connect your peripherals into the corresponding port(s) in the motherboard I/O. For monitors and displays, connect directly to the appropriate port(s) on the graphics card/GPU. Do NOT plug your monitor into the graphics port(s) on your motherboard, as it is disabled when a graphics card is installed in your system.
Need help?
Do you have a question about the TOWER 300 and is the answer not in the manual?
Questions and answers