Allowed devices are those firewalls, API Connectors, and Email Security systems from which the CSa will accept
files for analysis. Configuring allowed devices is therefore a critical step in the initial setup of your Capture
Security Appliance.
To begin the configuration, log into your CSa as the administrator and navigate to the Configuration > Allowed
Devices page.
To add an allowed firewall:
1. For adding a single device, click +Add Firewall to open the Add New Firewall dialog. For multiple
devices, click Import to open the Import Firewalls From File dialog.
NOTE:
To add firewalls in a High Availability pair to the allowed list, enter the serial numbers and
friendly names of both units into the Firewalls list, with each unit on its own line.
2. Enter the Serial Number, Friendly Name and Rate Limit information.
3. Click OK.
Configure Allowed Devices
Capture Security Appliance 1000 Getting Started Guide
12
24
Configure Allowed Devices