NewAir NCI080SS00 Owner's Manual page 23

EN
every hour until it reaches zero, indicating that the timer has ended. The
machine will then enter the corresponding mode desired.
How to cancel the timer setting
When the unit timer is set, press the "TIMER" button. The timer has been
successfully canceled after the number on the screen and the "H" are both
extinguished.
When the unit timer is set, the lower left corner of the display will show
both the timer time and the ice-making setting time. The display content
will alternate every 5 seconds.
7. Automatic self-cleaning program
The default cleaning time is 20 minutes.
Start the self-cleaning program: After connecting the water pipes, plug in
the main power supply, then press and hold the "TIMER CLEAN" button on
the control panel for more than 5 seconds. This will prompt the machine to
enter the self-cleaning program. The symbol will rotate on the display
screen, and the time countdown area will display "20M." The "CLEAN"
indicator will always be on during this period, and the digit window will
indicate the time remaining. The water pump will run for 8 minutes, then
stop for 3 minutes, repeating this cycle. The total duration is 20 minutes
for one self-cleaning program. When the cleaning cycle stops, the water
will re-supply to the water tank automatically.
Cancel the self-cleaning program: It takes about 20 minutes to complete
one self-cleaning program. When the program is over, the system will
enter its power-off state automatically. You can also press the "ON/OFF"
button on the control panel to cancel the self-cleaning program manually.
8. How to switch from Fahrenheit(°F) to Celsius(°c)
Press and hold the "+" or "-" button for longer than 5 seconds. This will
automatically switch the setting.
www.newair.com
23