Table of Contents
Advertisement
Handset
Assigning display keys / Changing assignments
The left and right display keys have a function preset by default when in idle mode. The key can
be re-assigned.
Press and hold the left or right display key in idle status . . . the list of possible key assign-
ments is opened
changed
Possible functions: Alarm Clock, Redial, Handset Directory . . . More functions are available in
More Functions...
Starting a function
With the telephone in idle status:
Testing DECT encryption
When this function is enabled, the handset tests whether the DECT connection to the base is
secure, i.e. is encrypted. If not, a message is shown on the display.
Settings
Change (
= enabled)
If a repeater without encryption is used, the secure connection test must be disabled.
If, on the base, encryption is disabled at a later time whilst the secure connection test is enabled
(because a repeater needs to be connected for example), Security Info - Press INFO is shown on
the handset.
Info . . . the situation is explained
During a call
A sound and a message on the display indicate when encryption is disabled on the base during
a call.
Continue call:
Stop call:
If neither is pressed, the call is stopped automatically after a certain time.
Testing the secure connection status during a call:
Press the Hash key
display
58
select the function
Briefly press . . . the assigned function is executed
OK
System
Sec. off . . . the secure connection test is disabled
Yes
No
for a longer time . . . the secure connection status is shown on the
OK . . . The assignment of the display key is
OK
Security Check
Advertisement
Table of Contents
