Usb Playback; Usb Recording - Crosley Slone CR7022A Instruction Manual

English
5. To forward skip, press the Forward Skip Button in and release.
6. To backward skip, press the Backward Skip Button in and release.
7. To pause the playback, short press the Pause button.
8. Press and hold the Play/Pause button to disconnect the Bluetooth.
Note: Bluetooth version – 5.0
Bluetooth Output Operation
This turntable features Bluetooth output which is a device that transmits audio
from this turntable to another Bluetooth device such as wireless Bluetooth
headphones, Bluetooth speakers, or other Bluetooth receiving devices.
1. Place the audio device that supports Bluetooth technology as close to your
turntable as possible.
2. Short press the Mode Button until "bt-O" is displayed on the Display Screen.
3. Set the device that you would like to connect to pairing mode.
4. Your turntable will connect automatically to your audio device once they are
both in pairing mode.
Note: If pairing is unsuccessful, make sure your audio device is not paired/connected to
another Bluetooth device.

USB Playback

1. Insert a USB device into the USB port and the unit will start playback
automatically.
2. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
3. During the playback, press the Play/Pause button to pause. Press it again to
resume playback.
Note: Only use 32 GB or smaller USB.

USB Recording

You can record the turntable record to a USB device.
1. Insert a USB flash stick to the USB port.
2. Short press the Mode button until "PHON" is displayed on the Display Screen.
3. Short press the Record button while the phono record is playing.
4. Short press Record button again to stop the recording.
5. To delete the recorded track, long press the REC button during playback.
Note: Only use 32 GB or smaller USB.
8