English
15. Turntable Platter
16. Turntable Spindle
17. 45 RPM Adapter
18. Tonearm Lever
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect the Speakers to the Speaker Jacks on the back of the unit.
3. Remove the tie-wrap that is holding the tonearm.
4. Connect power adaptor to the Power Jack of the unit.
5. Long press the Power button to turn the unit on and off.
Note: Do not plug the AC power adaptor to power outlet before all the assembly is
completed. Before turning the power on, make sure again all the connection settings
are correct. Always turn off the power when connecting or disconnecting.
19. Auto Stop Switch
20. Tonearm
21. Speed Switch
22. Tonearm Clip
5