NEC NP2150 Network Manual page 25

13
Select "SECURITY" page (if necessary).
17
Proceed to step
<1> Use the SELECT /
button to highlight the "SECURITY" tab.
The "SECURITY" page will be displayed.
14
Select "SECURITY TYPE".
Select whether SECURITY TYPE is performed or not.
To perform SECURITY TYPE, set an encryption key.
• DISABLE ......... Encryption is not performed. There is a risk of transmitted data being intercepted
• WEP(64BIT) .... Encryption is performed using WEP with a 64-bit long secret key.
• WEP(128BIT) .. Encryption is performed using WEP with a 128-bit long secret key. This offers
• WPA-PSK ........ Encryption is performed using WPA-PSK. This offers enhanced security compared
• WPA2-PSK ...... Encryption is performed using WPA2-PSK, which is an enhanced version of WPA-
15
Select "KEY SELECT" (only when WEP is selected).
If "WEP (64BIT)" or "WEP (128BIT)" is selected from "SECURITY TYPE", select which of the following
encryption keys, "KEY 1" to "KEY 4", is to be used.
if SECURITY is not set.
button to select the "CONNECTION" tab, and press the
by a third party.
enhanced security when compared to a 64-bit secret key.
to the WEP encryption scheme.
PSK.
4. Setting the LAN Setting of Projector
4
25