NEC NP2150 Network Manual page 20

4. Setting the LAN Setting of Projector
■ Setting Wireless LAN
1
Display the "WIRELESS" page of "NETWORK SETTINGS".
Configure the setting of wireless LAN in the "WIRELESS" page of "NETWORK SETTINGS" selected from
On-Screen Menu.
<1> In the "NETWORK SETTINGS" setting window, if the "GENERAL" tab is highlighted, press the
The "WIRELESS" page will be displayed.
• If "NETWORK SETTINGS" is not displayed, refer to "4-1. Displaying On-Screen Menu (NETWORK
SETTINGS)" (
2
Select "PROFILES".
<1> Press the SELECT
button.
<2> Use the SELECT /
• "PROFILE 1" or "PROFILE 2" can be stored in the memory of the projector as the setting for LAN.
• "EASY CONNECTION" is a mode in which the personal computer that runs Image Express Utility
2.0 in the User Supportware 5 CD-ROM is easily connected to wireless LAN.
Note that "EASY CONNECTION" does not support software other than Image Express Utility 2.0.
• When "EASY CONNECTION" is selected, the IP ADDRESS and SUBNET MASK do not have to be
set. To use "EASY CONNECTION", the user account of Windows must be [Administrator] privilege
(Windows Vista) or [Computer Administrator] privilege (Windows XP). It cannot be used with Windows
2000.
20
button to highlight "WIRELESS".
page 17).
button once to highlight the "PROFILES" field and press the
button to highlight "PROFILE 1", and press the button.