Wireless Lan - NEC NP2150 Network Manual

4-2. Wireless LAN

When connecting the wireless LAN, configure the LAN settings in the "WIRELESS" page of
"NETWORK SETTINGS" selected from On-Screen Menu.
■ Flow of Setting
1
Step Display "WIRELESS" page of "NETWORK SETTINGS".
2
Step Select "PROFILES".
3
Step Enable or disable "DHCP".
If "Disabled" (without check mark)
4
Step Input "IP ADDRESS".
5
Step Input "SUBNET MASK".
6
Step Input "GATEWAY".
7
Step Input "DNS CONFIGURATION".
Step 8 - 16 Setting of "ADVANCED".
8
Setting of "CONNECTION".
9 Select SSID in "SITE SURVEY".
10
Input "SSID" (if necessary).
11 Select "NETWORK TYPE" (if necessary).
12
Select "CHANNEL" (if necessary).
Step
Step
Step
If "Enabled" (with check mark)
13
Setting of "SECURITY"
14 Select "SECURITY TYPE".
15
Select "KEY SELECT".
16 Set "KEY 1 to KEY 4".
17
Finalize "ADVANCED".
18
Reconnect the network.
19
Finalize the setting.
4. Setting the LAN Setting of Projector
If "EASY CONNECTION" is selected
4
19