Electrical Shock Hazard; About This Kit - Bradford White LT199NXX1 Installation And Instruction Manual

2

Electrical Shock Hazard

Do not turn the power on until electrical wiring is finished. Disconnect the power before servicing.
Failure to do so may result in death or serious injury from electrical shock.

1. About this Kit

On-Demand Kit offers the most efficient way to save energy and water by adding Temperature Sensor and setting on the panel.
This kit is designed to deliver hot water to your entire home with the press of a button (within a few minutes). There are no standby
losses, no stack losses, and no need for extra storage tanks.
This kit can be used only on an external recirculation system with a dedicated return line.
Note> It may take a few minutes depending on the length of the pipe to prepare hot water to the desired fixture.
■ Items included in the kit
Before installation, verify that all the items below are included .
#
1
Wire for Temperature Sensor
2
3
2. Overall installation schematic
1) Re-circulation model
Terminal
Block
Wiring
Throughway
See Detail "A"
Parts
Temperature Sensor
(2 ties included)
(4.0 ft [1.2 m])
Instruction
Wires for Push Button Switches
and Temperature Sensor should
Wires
be connected to the terminal block
Included
located on the left side of the
in this kit
control panel.
Temperature
Sensor
Push Button Switch
& Wire
(Field supplied)
CAUTION
Shape
2) Standard model
Terminal
"A" Wiring Throughway
Block
Wiring
Throughway
See Detail "A"
Q'ty
1
1
1
Pump
Push Button Switch
(Field supplied)
& Wire