NEC MultiSync MT1055 User Manual page 32

3. In order for the changes to take effect, use the
the remote control or the projector cabinet to highlight "OK",
then press the Enter button. To cancel the changes, use the
buttons to highlight "Cancel" and press the "Enter" button.
To return to the factory default, select "Reset" then press the "En-
ter" button.
The default Basic/Custom Menu items are:
Source Select (RGB1/2, Video, S-Video and PC Card Viewer), Pic-
ture, Volume, Image Options (Keystone, Color Temperature and
Lamp Mode), Projector Options (Menu and Setup), Tools (Capture,
PC Card Files and ChalkBoard) and Help (Contents and Informa-
tion)
NOTE: Once you have selected OK on the Basic/Custom Menu Edit screen, you
cannot cancel the changes on the Menu screen. However, you can re-edit the
menu items over again as described in the steps above.
NOTE: If the "Advanced Menu" item has been selected on the Menu mode, you
get the "Confirmation Change Menu" upon completion of "Basic/Custom Menu"
editing. In this case, selecting "Yes" then "Enter" will close all the menus and
apply the changes from the Advanced menu to the Basic/Custom Menu. If you
select "No" then "Enter" functions, then all menu items will return to the Ad-
vanced menu, but your changes will still be available within the "Basic/Custom
Menu" selection. To display the previously tailored Basic/Custom Menu, select
"Basic/Custom Menu" from the "Menu Mode".
An item "To Advanced Menu" will be added to the bottom of the Basic/
Custom Menu.
Selecting this item and pressing the "Enter" button will display the "Ad-
vanced Menu" features.
or button on
or
E – 29