Usb A 2.0 Connector Repair - Jg4; Jg3 - HP E22 G5 Maintenance And Service Manual

USB A 2.0 Connector repair - JG4; JG3

1) Use a hot air gun to melt the solder on the pins Pin solder with soldering
iron and absorber.
You can gently push down with the soldering iron once everything is
molten to move the connector out of the through holes
2). Lift connector from the PCB
3). Place new component on the location, and must check it can match
PCB footprint
4). Soldering the new component by solder iron