Table of Contents
Advertisement
3.
Tighten all the screws completely.
To remove an existing mini-module:
1.
Loosen the 2 retention screws on the back module panel.
2.
Pull the module out of the slot.
3.
Tighten all the screws completely.
© SAMSUNG Electronics Co., Ltd.
In case, if the slot has to remain empty, cover the hole with a slot
cover by aligning the slot cover's screws with the screw holes on the
slot bay.
Ubigate iBG1003 Installation Manual/Ed.04
5-7
Advertisement
Table of Contents
