Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Electrolux KEZA9315L
Summary of Contents for Electrolux KEZA9315L
- Page 1 KEZA9315L Dishwasher User Manual...
-
Page 2: Table Of Contents
13. ENVIRONMENTAL CONCERNS..............28 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH • Make sure that the parameters on the • If the water inlet hose is damaged, rating plate are compatible with the immediately close the water tap and electrical ratings of the mains power disconnect the mains plug from the supply.
-
Page 6: Product Description
They are not and firmware including reset software. -
Page 7: Control Panel
ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open. -
Page 8: Programme Selection
Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". Delay Start indicator. It is on when you set the delay start. Refer to "Daily use". - Page 9 ENGLISH programme. The option increases the CAUTION! wash temperature and duration. Make sure that the items placed in the SprayZone GlassCare area do not block the upper spray arm. GlassCare prevents delicate load, glassware in particular, from damaging. ExtraPower The option prevents rapid changes in the dishwashing temperature of the selected ExtraPower improves the programme and reduces it to 45 °C.
-
Page 10: Basic Settings
Programme Dishwasher Degree of Programme phases EXTRAS load soil AUTO Crockery, • Prewash Not applicable Sense cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry Machine For cleaning the appliance •... - Page 11 ENGLISH Settings Values Description Water hardness From level 1 to lev‐ Adjust the level of the water softener ac‐ el 10 (default: 5) cording to the water hardness in your area. Rinse aid level From level 0 to lev‐ Adjust the level of the rinse aid according el 6 (default: 4) to the necessary dosage.
- Page 12 To enter setting mode, press and hold 5. Press and hold simultaneously simultaneously for about 3 about 3 seconds. seconds to exit setting mode. • The lights related to the The appliance returns to the programme Previous, OK and Next are on.
- Page 13 ENGLISH Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to prolong the programme duration by be regenerated regularly. This process is another 5 minutes when it occurs at any automatic and is the part of the normal point at the beginning or in the middle of...
-
Page 14: Before First Use
6.5 AirDry deactivation is saved. It is then selected automatically after you activate the AirDry improves the drying results. The appliance. appliance door opens automatically When the latest programme selection is during the drying phase and remains disabled, the default programme is ECO. - Page 15 ENGLISH hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process.
-
Page 16: Daily Use
4. Close the lid. Make sure that the lid Fill the rinse aid dispenser locks into position. when the indicator (A) is clear. 8. DAILY USE 1. Open the water tap. For information about the 2. Press and hold... - Page 17 ENGLISH 8.6 How to delay the start of a 2. Close the appliance door to start the programme. programme 8.4 How to activate EXTRAS 1. Select a programme. 2. Press repeatedly until the display 1. Select a programme using MY TIME shows the desired delay time (from 1 selection bar.
-
Page 18: Hints And Tips
The function comes into operation Press and hold for about 3 seconds. automatically: The appliance returns to the programme • When the programme is completed. selection. • After 5 minutes if a programme was If you cancel the delay start, not started. - Page 19 ENGLISH 9.4 Before starting a products can cause damage to the appliance. programme • In areas with hard and very hard water, we recommend to use basic Before you start the selected dishwasher detergent (powder, gel, programme, make sure that: tablets containing no additional •...
-
Page 20: Care And Cleaning
After the programme is completed, water can still remain on the inside surfaces of the appliance. 10. CARE AND CLEANING 3. Close the appliance door to start the WARNING! programme. Before any maintenance When the programme is complete, the other than running the reminder message is disabled. - Page 21 ENGLISH • Do not use abrasive products, abrasive cleaning pads or solvents. 10.5 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
- Page 22 10.6 Cleaning the lower spray 10.7 Cleaning the upper spray We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes.
-
Page 23: Troubleshooting
ENGLISH 1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. Pull out the cutlery drawer to the maximum. 3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. - Page 24 Problem and alarm code Possible cause and solution You cannot activate the • Make sure that the mains plug is connected to the appliance. mains socket. • Make sure that there is no damaged fuse in the fuse box.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution The level of water inside • Switch the appliance off and on. the appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
- Page 26 Problem and alarm code Possible cause and solution The appliance switches off • Complete power outage. The wash cycle is tempora‐ during operation. rily interrupted and resumes automatically once the power is restored. Once you have checked the appliance, WARNING! deactivate and activate the appliance.
- Page 27 ENGLISH Problem Possible cause and solution The interior of the appliance • This is not a defect of the appliance. Humidity con‐ is wet. densates on the appliance walls. Unusual foam during wash‐ • Use the detergent designed specifically for dish‐ ing.
-
Page 28: Technical Information
12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 - 60 Water supply pressure bar (minimum and maximum) 0.5 - 10 MPa (minimum and maximum) 0.05 - 1.0... - Page 32 www.electrolux.com/shop...
Need help?
Do you have a question about the KEZA9315L and is the answer not in the manual?
Questions and answers