Reducting Noise In The Picture - NEC PlasmaSync 42MP2 User Manual

Reducing noise in the picture
Use these settings if the picture has noise due to poor re-
ception or when playing video tapes on which the picture
quality is poor.
Example: Setting "NR-3"
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "PICTURE", then
press the "PROCEED" button.
The "PICTURE" screen appears.
2. Use the and buttons to select "NR ".
P I C T U R E
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL. ADJ.
3. Use the and buttons to select "NR-3".
The mode switches as follows when the
tons are pressed:
OFF NR–1 NR–2
NR
* If neither the or
onds, the current selection is set and the previous
screen reappears.
R G
: MEMORY
: 2
: NR-2
EXIT RETURN
and
NR–3
:
NR-3
button is pressed within 5 sec-
4. Press the "PROCEED" button.
The noise reduction mode is set to "NR-3".
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL.
5. Once the setting is completed ...
Press the "EXIT" button to return to the main menu.
To delete the main menu, press the "EXIT" button once
more.
Information
NR
* "NR" stands for Noise Reduction.
* This function reduces noise in the picture.
Types of noise reduction
There are three types of noise reduction. Each has a dif-
ferent level of noise reduction.
but-
The effect becomes stronger as the number increases
(in the order NR-1
OFF .......... Turns the noise reduction function off.
22
P I C T U R E
R G
: MEMORY
: 2
: NR-3
ADJ. EXIT RETURN
NR-2 NR-3).