Setting The Picture Mode According To The Brightness Of The Room - NEC PlasmaSync 42MP2 User Manual

Setting the picture mode according to the bright-
ness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the "THEATER" mode
Press the PROCEED button on the remote controller to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select "PICTURE", then
press the "PROCEED" button.
The "PICTURE" screen appears.
2. Use the and buttons to select "PICTURE MODE".
P I C T U R E
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL. ADJ.
3. To set to "THEATER" ...
Use the and buttons to select "THEATER".
The mode switches as follows when the
tons are pressed:
MEMORY THEATER
PICTURE MODE
* If neither the or
onds, the current selection is set and the previous
screen reappears.
R G
: MEMORY
: 2
: NR-2
EXIT RETURN
and but-
NORMAL RESET
: THEATER
button is pressed within 5 sec-
4. Press the "PROCEED" button.
The picture mode is set to "THEATER".
P I C T U R E
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
COLOR TEMP.
NR
SEL.
5. Once the adjustment is completed ...
Press the "EXIT" button to return to the main menu.
To delete the main menu, press the "EXIT" button once
more.
Information
Types of picture modes
MEMORY ...... The last picture adjustments are stored
here.
THEATER ...... Set this mode when watching video in
a dark room.
This mode provides darker, finer pic-
tures, like the screen in movie theaters.
CONTRAST = 80% for RESET mode
BRIGHTNESS = 95% for RESET mode
NORMAL ....... Set this mode when watching video in
a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
CONTRAST = 96% for RESET mode
RESET .......... Use this to reset the picture to the fac-
tory default settings.
19
R G
: THEATER
: 2
: NR-2
ADJ. EXIT RETURN