Multi Display - NEC MultiSync P701 User Manual

MONITOR INFORMATION Monitor Information.
OSD TRANSPARENCY
OFF
TYPE1
TYPE2
OSD ROTATION
LANDSCAPE
PORTRAIT
INPUT NAME
CLOSED CAPTION
VIDEO1, VIDEO2, S-VIDEO inputs only
OSD RESET

MULTI DISPLAY

MONITOR ID
IR CONTROL
NORMAL
PRIMARY
SECONDARY
LOCK
TILE MATRIX
H MONITORS
V MONITORS
POSITION
TILE COMP
ENABLE
POWER ON DELAY
POWER INDICATOR
EXTERNAL CONTROL
CONTROL
LAN RESET
SETTING COPY
COPY START
ALL INPUT
MULTI DISPLAY RESET
CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon
footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).
Set the transparency level of the OSD.
Determines the OSD display direction between landscape and portrait.
Display the OSD with landscape mode.
Display the OSD with portrait mode.
You can set currently displayed INPUT name as you like.
Max: 8 characters, including Space, A-Z, 0-9, and some symbols.
Activates closed captioning.
Resets the following settings within the OSD menu back to factory setting:
OSD TURN OFF, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,
CLOSED CAPTION.
Sets the monitor ID number from 1-100 and group ID from A-J.
NOTE: Group ID is made of multiple selections.
Selects the mode of the monitor for use with the infra-red remote control when using the
RS-232C daisy chain.
The monitor will be controlled normally by wireless remote controller.
Choose "PRIMARY" for the first monitor within an RS-232C daisy chain.
Choose "SECONDARY" for all subsequent monitors within an RS-232C daisy chain.
Prevents the monitor from being controlled by wireless remote controller. To return to normal
operation, press the "DISPLAY" button on the remote controller for 5 seconds.
Allows one image to be expanded and displayed over multiple screens (up to 100) through a
distribution amplifier.
NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate
without a distribution amplifier at the lower number of screens.
Number of monitors arranged horizontally.
Number of monitors arranged vertically.
Select which section of the tiled image to be displayed on the monitor.
Turns the TILE COMP feature on.
Enables Tile Matrix.
Adjusts the delay time between being in "standby" mode and entering "power on" mode.
"POWER ON DELAY" can be set between 0 and 50 seconds.
Turns ON or OFF the LED located at the front of the monitor.
If "OFF" is selected, LED will not light when the LCD monitor is in active mode.
Selects the control interface, RS-232C or LAN.
Resets the LAN settings.
In daisy chain condition, set the OSD menu categories which copy from current monitor to
others. NOTE: When you use this function, EXTERNAL CONTROL should be "RS-232C".
This function resets to default when power is off. This function has a limit depending on the
cable you use.
Select "YES" and press SET button to start copy.
When you check this item, copy to all input teminals. Default is off.
Resets "MULTI DISPLAY" options back to factory settings.
English-24
-
TYPE2
LANDSCAPE
-
OFF
-
1
NORMAL
1
1
1
NO
NO
0 Sec.
ON
RS-232C
NO
-