Audio; Schedule - NEC MultiSync P701 User Manual

H RESOLUTION
VGA, RGB/HV inputs only
V RESOLUTION
VGA, RGB/HV inputs only
INPUT RESOLUTION
VGA, RGB/HV inputs only
ZOOM MODE
All inputs except TV*
BASE ZOOM
16:9
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only
14:9
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only
DYNAMIC
HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO inputs only
OFF
All inputs, except TV*
CUSTOM
All inputs, except TV*
ZOOM**
H ZOOM**
V ZOOM**
H POS**
V POS**
ASPECT
ADJUST RESET

AUDIO

BALANCE
TREBLE
BASS
PIP AUDIO
LINE OUT
SURROUND
AUDIO INPUT
AUDIO RESET

SCHEDULE

OFF TIMER
SCHEDULE SETTINGS
SCHEDULE LIST
DATE & TIME
YEAR
MONTH
DAY
TIME
DAYLIGHT SAVING
*: The product you purchased may not have this feature.
Adjusts the horizontal size of the image.
Adjusts the vertical size of the image.
If there is a problem with signal detection, this function forces the monitor to display the
signal at the desired resolution. After selection, execute "AUTO SETUP" if required.
If no problem is detected, the only available option will be "AUTO".
Select the aspect ratio of the screen image.
For input sources that have a 16:9 aspect ratio.
For input sources that have a 14:9 aspect ratio.
Expands 4:3 picture to fill the screen. Some of the image is lost due to expansion.
Selecting "OFF" will display the image in a 1 by 1 pixel format. (If the input resolution is
higher than a 1920 x 1080 resolution, the image will be scaled down to fit the screen.)
Displays an image as large as possible without changing the aspect ration.
Maintains the aspect ratio while zooming.
Amount of horizontal zoom. Can be adjusted for each BASE ZOOM setting.
Amount of vertical zoom. Can be adjusted for each BASE ZOOM setting.
Horizontal position. Can be adjusted for each BASE ZOOM setting.
Vertical position. Can be adjusted for each BASE ZOOM setting.
Selects picture aspect, [FULL], [NORMAL], [WIDE] and [ZOOM]. See page 18.
Resets the following settings within the ADJUST menu back to factory setting:
AUTO ADJUST, H POSITION, V POSITION, CLOCK, CLOCK PHASE, H RESOLUTION,
V RESOLUTION, ZOOM MODE, ASPECT.
Selects source of PIP audio.
Selecting "VARIABLE" will enable to control line out level with VOLUME button.
Artificial surround sound.
Selects audio input source [IN1], [IN2], [IN3], [DPORT], [HDMI], [TV]*, [OPTION]*.
Resets "AUDIO" options back to factory settings.
Sets the monitor to power off after a length of time.
A time between 1 to 24 hours is available.
Creates a working schedule for the monitor to use.
List of schedules.
Sets the date, time, and daylight saving region. Date & time must be set in order for the
"SCHEDULE" function to operate. See page 27.
English-22
-
-
AUTO
-
CUSTOM
1.00
1.00
1.00
0%
0%
FULL
-
CENTER
0
0
MAIN AUDIO
FIXED
OFF
Depend on signal input
-
OFF
-
-
-
-
-
-
OFF
**: 16:9, 14:9, CUSTOM only