Intended Use - Ten-Haaft Oyster Vision II Operating Instructions Manual

Intended use

The intended use of this product is the fixed assembly on mobile
homes or trailers (caravans) with a maximum speed of no more
than 130 km/h. With parked carrier vehicle, the product is able to
align the mounted parabolic antenna automatically to one of the
geostationary, directly broadcasting television satellites operating
for Europe. Voltage supply must take place via a standard motor
vehicle on-board electrical system with a rated voltage of 12 V /
24 V.
Any other use than that described above is not permissible.
Please also observe the following instructions of the manufacturer:
• Any modification of the total system by removing individual
components or by adding other components is not permissible.
• The use of other parabolic reflectors or LNBs than the originally
installed parts is not permissible.
• Assembly has to be performed by sufficiently qualified personnel.
• Relevant, recognized guidelines of the automotive trade are to be
observed and adhered to.
• The assembly is only permissible on hard vehicle roofs with
sufficient firmness and internal stability.
• The product does not require any regular maintenance. The
housings may not be opened. Always have examination work only
be done by a qualified specialist.
• In case of uncertainty or problems please turn to the manufacturer
or to a workshop recognized by the manufacturer.
1