Ten-Haaft Oyster Vision II Operating Instructions Manual page 18

Keep in mind: You must program both your Oyster Vision and
your receiver correctly and in the same way in order to be able to
use the DiseqC functions successfully.
Please absolutely consult the operating instructions of your
receiver for the programming of the receiver.
SAT position
Assignment of satellites to "position 1" through "position 4".
You have the possibility to select altogether up to 4 positions (satellites)
for the normal satellite change or the DiseqC satellite change.
Each of the 4 positions can be assigned a satellite from the list of the
search satellites.
Select first "position 1" and press the key . With the arrow keys you
can now select the satellite desired for this position. With you
confirm your selection.
Proceed for "position 2" through "position 4" in exactly the same way as
described for "position 1".
For the German-speaking countries it is advisable to assign Astra 1 to
"position 1" and Hotbird to "position 2". This also corresponds to the
factory-installed default.
Please read the explanations in the separate chapter "The DiseqC
system" on page 18.
17