Quick Start Guide - Sprout Invoke Instruction Manual

03.

Quick Start Guide

Charging your Invoke Bluetooth Headphones:
1. Insert the USB-C end of the charging cable into
the charging input as shown.
2. Insert the USB-A end of the cable into a power
source* to charge. The LED indicator will be red
while charging is in progress. The LED indicator
will be blue when charging is complete. A full
charge will take approximately 2.5 hours.
* Using a USB Type C charging cable to connect to a
5V-2A (10W) adapter is recommended. Adapters with
larger wattage can also be used (maximum 24W). Car
chargers, power banks or docking stations may have
fluctuating output. Charging using these devices is
not recommended.
06
03.
Quick Start Guide
Connecting to your Invoke Headphones via Bluetooth:
• Your mobile device needs to be within 10 meters
of the Invoke Headphones
• Make sure your Invoke Headphones' battery has
a sufficient charge
• Compatible with iOS, Android and other
Bluetooth devices
To pair your device:
1. To enter into pairing mode from power off, press
and hold the power button until you hear "power
on". The LED indicator will flash blue and red when
your Invoke Headphones are in pairing mode.
2. Turn on Bluetooth on your mobile phone/music
device.*
3. 'Invoke BT Headphones' will appear on your mobile
phone/music device. Select 'Invoke BT Headphones'
to pair. The LED indicator will flash blue every 5
seconds when pairing is successfully complete.
4. Enjoy your music.
5. After the initial pairing, the headphones will
always automatically pair with the previously
paired device.
* If you are not familiar with Bluetooth pairing for
your mobile phone or music device, refer to the
user guide for your mobile phone/music device for
instructions to pair a new device using Bluetooth.
07