Specications and Characteristics
Denition of Terms
Frequency Range
HP 84125A
HP 84125B
HP 8593EM EMC Analyzer
Additional instrument specications are described in
EMC Analyzer Display Average Noise Level
(Measured at test-set input with 1 MHz RBW)
1 to 18 GHz
18 to 26.5 GHz
2
For use with the through cable or the correct high-pass lter for the selected frequency range
1
For an HP 84125B only.
2
Limit to Noise Ratio / Sensitivity (Characteristic)
>
6 dB (at 64 dB
V/m)
This chapter contains specications, characteristics, and typical
performance for the HP 84125A/B system.
Specications
describe warranted performance which is traceable
to the National Bureau of Standards (NIST).
Characteristics
describe non-warranted performance derived
during the design phase of the system and is not veried on a
continuing basis.
Typical Performance
which most units will exhibit.
HP 8590 EM Series EMC Analyzer Calibration Guide
1
is non-warranted, but indicates performance
1 to 18 GHz
1 to 26.5 GHz
Specication
8 dB
V
15 db
V
Specications and Characteristics 2-1
2
.
Typical
1 dB
V
5 db
V