Table Of Contents - HP 84125A User Manual

Contents
1. Product Description
Measurement Overview . . . . . . . . . . . . . . .
2. Speci cations and Characteristics
De nition of Terms . . . . . . . . . . . . . . . . . .
Antenna Speci cations and Characteristics . . . . . .
Typical Sensitivity for an HP 84125A/B System . . . . .
Amplitude Accuracy . . . . . . . . . . . . . . . . .
Declaration of Conformity
3. System Setup and Functional Tests
System Setup . . . . . . . . . . . . . . . . . . . . .
Initial Inspection . . . . . . . . . . . . . . . . . .
Test-Set Components . . . . . . . . . . . . . . . .
Installing the HP 84125A/B System . . . . . . . . .
Assembling the Test Mobile Instrument Cart . . . .
Installing the EMC Analyzer . . . . . . . . . . . .
Attaching the Power Module and Power Cords . . .
Installing the Accessories and Test Set in the System
Performing an EMC Analyzer Calibration . . . . . .
Connecting the RF Cable Assembly to the EMC
Analyzer . . . . . . . . . . . . . . . . . . .
Connecting the DC Ampli ers to the RF Cable
Assembly . . . . . . . . . . . . . . . . . . .
System Functional Tests . . . . . . . . . . . . . . . .
Test Set Veri cation Description . . . . . . . . . . .
Procedure . . . . . . . . . . . . . . . . . . . . .
Displayed Average Noise Level (DANL) Description . .
Equipment Required . . . . . . . . . . . . . . . .
Procedure: Input 1 to 18 GHz (1 to 2.9 GHz, 2.68 to 18
GHz) . . . . . . . . . . . . . . . . . . . . . .
Input 18 to 26.5 GHz (For an HP 84125B only) . . . .
4. Test Set Hardware Con gurations
1 to 18 GHz Con guration . . . . . . . . . . . . . .
18 to 26.5 GHz Con guration (For the HP 84125B only)
Cable and Connector Care . . . . . . . . . . . . . . .
Connection Procedure . . . . . . . . . . . . . . .
Disconnection Procedure . . . . . . . . . . . . . .
Handling and Storage . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
1-2
2-1
2-2
2-4
2-5
2-6
3-1
3-1
3-2
3-4
3-4
3-4
3-6
3-6
3-6
3-7
3-10
3-11
3-11
3-13
3-15
3-16
3-16
3-18
4-1
4-4
4-5
4-5
4-6
4-6
Contents-1