Table of Contents
Advertisement
Replace or tighten the V-belt if you notice the motor running and the chipper blades
are not spinning.
To perform this procedure:
1.
TURN OFF THE MACHINE, ALLOW ALL MOVING PARTS TO COME TO A
COMPLETE STOP, AND DISCONNECT THE SPARK PLUG WIRE!
2.
Remove the V-belt cover as shown in Pic.22.
3.
Roll the belt off of the pulleys and install the new belt.
4.
Replace the V-belt cover and re-attach the spark plug wire.
Pic.21 Chipper blade
Replacing V-Belt
19
Advertisement
Table of Contents
