Operation
② In heating mode, set temperature to 16°C, long press FAN
key for 5 seconds to enter energy saving parameter of heating
mode setting, the parameter will be displayed in the top-left
corner. You can use
parameter adjustment range is from 16 to 30. After adjustment,
press MENU key to confirm changes.
Filter Cleaning
When filter cleaning icon
in function circulation. Press MENU key to enter function
circulation, use
functions. Switch to
the display of
10°C heating function (only valid for some models)
(1) Only in heating mode, this function is valid in function
circulation.
(2) Press MENU key, you will enter function circulation, use
or
key to switch between different functions. When it
switches to the 10°C heating function, 10°C will flash in the
temperature display area. Press MENU key to confirm.
(3) In the state of the 10°C heating function, when you switch
to the 10°C heating function in the function circulation,
pressing MENU key to turn it off.
or
key to adjust parameter, and the
is displayed, the icon will display
or
key to switch between different
icon, press MENU key again to cancel
icon .
17