Pioneer DJM-2000 Firmware Update Manual page 7

2 . Ma k e su r e t h a t y o u r DJ Mi x er an d co m p u t er a r e co n n ect ed
Find an icon on the task bar ( right- bottom of your screen) to identify the connection status.
I co n Messag e
Not Connect ed
I dentifying...
Unidentified
network
3 . St ar t u p d a t i n g y o u r f i r m w ar e
 Close all the applicat ions before you start updat ing.
 Depending on the firewall setting of your security software and/ or operat ing system , your com puter
and m ixer m ay not be connected properly. I n such a case, you need to exem pt the update tool
( DJM2000_vxxx.exe) from your firewall sett ings.
Please contact custom er support of the security software provider and/ or operat ing system for
further details regarding firewall settings.
< STEP1 > Double click "DJM2000_vxxx.exe".
Start update tool.
< STEP2 > Select a language from the dropdown list and click "OK".
< STEP3 > Start updat ing by pressing "START".


LAN cable is not connect ed.
Make sure that the cable is properly connect ed.
I dentifying connection.
Wait for the connection to be est ablished. I t m ay take about one m inute.
DJ Mixer is connected.
I t is ready to start the update t ool.
DO NOT rem ove power cable and/ or LAN cable during the update.
I f the Connect dialog box keeps appearing for 30 seconds or longer, the network
connect ion m ight not be established. Press the "EXI T" button and try connect ing the
network again to update.
Co n n ect io n st at u s
- 7 -