Pioneer DJM-2000 Firmware Update Manual page 27

< STEP3 > Start updat ing by pressing "START".

DO NOT rem ove power cable and/ or LAN cable during the update.

I f the Connect dialog box keeps appearing for 30 seconds or longer, the network
connect ion m ight not be established. Press the "EXI T" button and try connect ing the
network again to update.
< STEP4 > Make sure that the updat e process has been com pleted.
The following "update com pleted" m essage appears when the progress bar
on the touch panel reaches 100% .
< STEP5 > Restart DJ Mixer.

I f any changes were m ade in the above "1. Change network sett ings" of this chapter,
please restore the network settings to the previous values.
- 27 -