Step 3: Repeat Step 1 - NEC MultiSync LCD1500M Setup Instructions

Step 2 Make sure that your computer is set up for 1024x768 resolution.
Open the Display Properties window by following this mouse click sequence (1 , 2, 3, 4, & 5) indicated
by the numbered arrows below.
2
1
Step 3 Repeat Step 1.
This will ensure that the monitor is auto-adjusted to the new resolution.
If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user's
LCD1500 2
On the right side of the Display Properties window there is a box labeled
area. Make sure the
You may have to restart your computer for this change to take effect. After the restart,
double check the
Display Properties/Settings
now at 1024x768.
(Proceed to Step 3.)
3
4
manual or contact your NEC Technical Support representative.
slide bar (6) is set to 1024x768.
"Screen"
12/8/98, 4:41 PM
Display
window to make sure you are
5
6