Communication Range In/Out Detect - Kenwood UBZ-LH68 Instruction Manual

COMMUNICATION RANGE IN/OUT DETECT

With a CTCSS number programmed, this transceiver can
also check if your party is within a communication range.
When he (or she) is within the range, the In-range icon
( ) is visible. If out of the range, this icon is invisible.
When your party goes beyond the range, an alarm beep
also sounds. In order to monitor your party, the
transceiver automatically transmits signals at
predetermined intervals to receive acknowledgement.
1
2
3
4
Note: If you have selected OFF for the CTCSS number, you cannot
switch this function ON. Selecting OFF for the CTCSS number after
switching the function ON switches it OFF automatically. Starting
Channel Scan {page 18} also deactivates this function.
With the transceiver power OFF, press
and hold the UP key, then press the
POWER switch.
Press the UP or DOWN key to select
"Cd" (Menu No. 1).
Press the MODE key to switch the
function ON (or OFF).
• When the function is switched ON, " "
appears.
Press the PTT switch to exit Menu
mode.
15