Download  Print this page

Raise And Lower Monitor Screen - NEC MultiSync EA232WMI User Manual

Nec multisync ea232wmi: user guide
Hide thumbs


Table of Contents
8. Connect the power cord to the power outlet (Figure E.1).
Please refer to Caution section of this manual for proper selection of AC power cord.
9. Turn on the monitor with the front power button and the computer (Figure E.1).
10. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings.
For further adjustments, use the following OSD controls:
• Auto Adjust Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to the Controls section of this User's Manual for a full description of these OSD controls.
If you have any problems, please refer to the Troubleshooting section of this User's Manual.

Raise and Lower Monitor Screen

The monitor may be raised or lowered. To raise or lower screen, place hands on each side of the monitor and lift or lower to
the desired height (Figure RL.1).
Handle with care when raising or lowering the monitor screen.
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).
Handle with care when tilting and swivelling the monitor screen.
Figure E.1
Figure RL.1
Figure TS.1
Power Button

Hide quick links:


Table of Contents

  Also See for NEC MultiSync EA232WMI

  Related Manuals for NEC MultiSync EA232WMI

This manual is also suitable for: