5
6.
Insert the 3.5-inch cage into the disk slot.
Put attached SLOT LABEL on right side of cage.
To install the disk cage, hold the front of the cage to insert into the server.
To remove the disk cage, also hold the front of the cage to pull it out from the
server. Take care not to touch the left and right guide rails inside the cage.
7.
Connect each cables with referring to "step 3 connect the cable".
8.
Use the four screws that came with the cage to fix this in server.
Keep the removed dummy trays and extra screws for future use.
Notice
Putting position of SLOT LABEL
CAUTION