Menu Tools - NEC MultiSync 70GX2 User Manual

Controls
AccuColor
AccuColor
and NATIVE color presets are standard and cannot be changed).
R,G,B: Increases or decreases Red, Green or Blue color depending upon which is
selected. The change in color will appear on screen and the adjustment (increase
or decrease) will be shown by the bars.
NATIVE: Original color presented by the LCD panel that is unadjustable.
sRGB: sRGB mode dramatically improves the color fidelity in the desktop
environment by using a single standard RGB color space. With this color sup-
ported environment, the operator could easily and confidently communicate color
without further color management overhead in the most common situations.
NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE,
NATIVE is selected automatically as the six color preset and cannot be changed.
Tools
OFF TIMER: Monitor will automatically power-down when the end user has selected
a predetermined amount of time.
LED BRIGHTNESS: You can adjust the Blue LED brightness
HOT KEY: You can adjust the brightness and contrast directly. When this function is
set to ON, you can adjust the brightness with left or right control and contrast with
up or down control while the OSM menu is off.
FACTORY PRESET: Selecting Factory Preset allows you to reset all OSM control set-
tings back to the factory settings. The RESET button will need to be held down for
several seconds to take effect. Individual settings can be reset by highlighting the
control to be reset and pressing the RESET button.

Menu Tools

LANGUAGE: OSM
OSM LEFT/RIGHT: You can choose where you would like the OSM control
image to appear horizontally on your screen.
OSM DOWN/UP: You can choose where you would like the OSM control image to
appear vertically on your screen.
OSM TURN OFF: The OSM control menu will stay on as long as it is in use. In the
OSM Turn Off submenu, you can select how long the monitor waits after the last
touch of a button to shut off the OSM control menu.
OSM LOCK OUT: This control completely locks out access to all OSM control func-
tions except Brightness and Contrast. When attempting to activate OSM controls
while in the Lock Out mode, a screen will appear indicating the OSM controls are
locked out. To activate the OSM Lock Out function, press SELECT, then right control
button and hold down simultaneously. To deactivate the OSM Lock Out, press
SELECT, then left control button and hold down simultaneously while in the OSM
menu.
–continued
Control Systems
®
Control Systems: Six color presets select the desired color setting (sRGB
®
control menus are available in eight languages.
®
0