Table of Contents
Advertisement
Available languages
Available languages
•
The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
•
Trays and wire grids can be positioned
on any level from of 1 to 7.
•
Telescopic rail can be positioned on
levels T1, T2, 3, 4, 5, 6, 7.
•
Level 3 is recommended for single level
cooking.
•
Level T2 is recommended for single
level cooking with the telescopic rails.
•
Level 2 and Level 4 are recommended
for double level cooking.
•
The turnspit wire grid must be
positioned on Level 3.
•
Level T2 is used for turnspit wire grid
positioning with the telescopic rails.
****Accessories may vary depending on the
model purchased.
FIRST IN THE WORLD
Hot Air Shield System in Built-in Ovens
The patented hot air shield system prevents
hot air from reaching the end user by
creating an air curtain when the oven door
is opened.
The Shallow Tray
The shallow tray is best used for baking
pastries.
Put the tray into any rack and push it to the
end to make sure it is correctly placed.
Wire Rack with Easyfix Full Extension
Telescopic Rail
The telescopic rail extends out fully to allow
easy access to your food.
Telescopic rails
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
Fastener
•
Positioning of the telescopic rails on the
wire rack is secured with the fastening
tabs on the fasteners.
•
Remove the side runner. See section
"Removal of the wire shelf".
•
On each telescopic rail there are top
and bottom fasteners that allows you to
reposition the rails.
•
Hang the telescopic rail top fasteners
on the side rack level reference wire
and simultaneously press the bottom
fasteners until you clearly hear the
fasteners clip into the side rack level
fixing wire.
•
In order to remove, hold the front
surface of the rail and follow the
previous instructions in reverse.
EN - 20
Fastening tab
Advertisement
Chapters
Table of Contents
